🔵 PWR Reactor Coolant System (RCS)

BWR reactor building ventilation and off‑gas systems manage airborne radioactivity, maintain controlled pressure zones, and ensure safe handling of non‑condensable gases produced during reactor operation. These systems are essential for radiological protection, plant habitability, and compliance with regulatory dose limits.

• Pressure Zoning: Maintains negative pressure in areas with potential airborne radioactivity.
• Filtration: HEPA and charcoal filters remove particulates and iodine species.
• Airflow Control: Ensures clean‑to‑contaminated directional flow paths.
• Habitability: Supports safe access during normal operation and transients.

• Non‑Condensable Gas Handling: Processes gases from the main condenser air ejector system.
• Delay Beds: Activated carbon beds provide holdup time for N‑16 and noble gas decay.
• Moisture Separation: Prevents water carryover into off‑gas trains.
• Radiation Monitoring: Continuous sampling ensures compliance with release limits.

• Integration with Turbine Cycle: Off‑gas originates from condenser air removal systems.
• Decay Storage: Charcoal beds provide hours of holdup for short‑lived isotopes.
• Stack Release Control: Final discharge is monitored and filtered as required.
• Accident Response: Ventilation isolation and standby gas treatment systems engage automatically.

• Limits radiological releases to the environment.
• Protects workers from airborne contamination.
• Supports regulatory compliance for dose and effluent limits.
• Ensures safe operation during normal and transient conditions.

The EPR employs a highly redundant electrical power architecture designed to maintain safety system availability under extreme conditions. Four independent safety trains, each with its own power sources, ensure robust protection against electrical failures.

• Four Independent Safety Buses: Each train has its own electrical distribution system.
• Diesel Generators: One per train, providing emergency AC power.
• Batteries & Inverters: Supply DC power for instrumentation and control.
• Alternate AC Sources: Additional backup generators for extreme events.

• Physical Separation: Electrical rooms are located in separate quadrants.
• Diverse Power Paths: Reduces common-cause failure risk.
• Automatic Load Shedding: Prioritizes safety loads during emergencies.
• Seismic & Flood Protection: Electrical systems hardened against external hazards.

• Ensures safety system availability under all conditions.
• Supports long-term accident mitigation.
• Defines the EPR’s robust electrical safety case.

VVER feedwater systems supply water to the horizontal steam generators, ensuring stable secondary-side conditions and efficient heat transfer. Their design reflects the unique geometry and flow characteristics of VVER steam generators.

• Feedwater Pumps: Provide high-pressure flow to the steam generators.
• Feedwater Heaters: Improve thermal efficiency through staged heating.
• Distribution Headers: Deliver feedwater evenly across the SG tube bundle.
• Control Valves: Regulate flow based on steam demand and SG level.

• Horizontal SG Dynamics: Feedwater enters at one end and flows across the tube bundle.
• Level Control: Maintains stable boiling and steam separation.
• Thermal Efficiency: Optimized through multi-stage feedwater heating.
• Natural Circulation Support: Stable feedwater flow enhances passive cooling.

• Defines steam generator performance and stability.
• Supports efficient secondary-side heat transfer.
• Integrates with VVER passive safety systems.

CANDU reactors incorporate a large shield tank surrounding the calandria vessel, providing both biological shielding and thermal buffering. This water-filled structure is a key component of the reactor’s radiation protection and passive safety strategy.

• Radiation Shielding: Water attenuates gamma and neutron radiation from the core.
• Thermal Buffer: Absorbs heat from the calandria and surrounding structures.
• Structural Support: Integrates with the reactor vault and calandria supports.
• Passive Heat Sink: Provides thermal inertia during abnormal events.

• Concrete Vault: Thick walls provide additional gamma and neutron attenuation.
• Water Moderation: Reduces neutron energy before reaching concrete.
• Access Control: Shielding design defines safe working zones.
• Long-Term Integrity: Cooling prevents concrete degradation.

• Protects workers and equipment from radiation.
• Supports severe accident heat absorption.
• Defines the reactor building’s shielding architecture.

The turbine bypass system allows steam to be diverted directly to the condenser, enabling rapid reactor pressure control without relying solely on turbine load. This system is essential for load-following, startup, shutdown, and transient mitigation.

• Bypass Valves: Large, fast-acting valves that route steam to the condenser.
• Pressure Regulators: Maintain vessel pressure during power changes.
• Condenser Steam Dumps: Absorb large steam flows during rapid transients.
• Control Logic: Integrates with recirculation and feedwater systems.

• Load Rejection Response: Prevents pressure spikes when turbine load drops suddenly.
• Startup & Shutdown: Controls pressure before turbine synchronization.
• Power Maneuvering: Supports flexible grid operation.
• ATWS Mitigation: Helps maintain vessel pressure during abnormal events.

• Prevents reactor pressure excursions.
• Improves plant flexibility and grid stability.
• Reduces reliance on SRVs for pressure control.